D-Link DCS-2000 Product Manual - Page 59
Record Snapshots to your FTP server with, Motion Detection continued - manual
View all D-Link DCS-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Record Snapshots to your FTP server with Motion Detection (continued) Next, click the Network button under the Advanced tab to set the FTP server settings for the DCS-2000. Click Network 1 123.123.123.1 2 John Smith 3 4 Snapshot 5 6 In this window, enter the settings for the FTP server you wish to record to. Optionally, you can enter settings for a secondary backup FTP server. 1 Local FTP server port- The Default port is 21. To connect to an FTP sever, it is recommended that you do not change the port number unless your camera is behind a router. If your camera is behind a router, you can assign any port number to this field, but you must enable port forwarding on the router. Please refer to your router manual for more information on port forwarding. 2 1st FTP server- If you are going to upload snapshots to an FTP server, you will need to fill in the Domain name or IP address of your external FTP server such as ftp://dlink.com or ftp://123.123.123.1. (The server name and IP address will vary depending on the user.) The following user settings must be correctly configured for remote access. 59