D-Link DCS-5605 Product Manual - Page 40
Wireless Mode, Channel, Authentication, Encryption, Save Settings
UPC - 790069334870
View all D-Link DCS-5605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Wireless Mode: Select Infrastructure (connect to an access point or wireless router) or Ad-Hoc (connect directly to a wireless client also in ad-hoc mode). Channel: Enter the wireless channel of your wireless network. When connecting to an access point or wireless router, this will automatically be set. Authentication: Select the type of encryption/security. You must know the security settings of your wireless network. If you selected a network from the drop-down menu, this will be automatically set. Encryption: Select Enable or Disable. If you selected a network from the drop-down menu, this will be automatically set. Key: Enter the security key or passphrase. Save Settings: Click the Save Settings button to save and activate your settings. Allow up to 2 minutes to connect to your wireless network. The image to the right is an example of a wireless setup. After clicking the Scan button, a list of networks were displayed in the drop-down menu. The wireless network called dlink was selected. As a result, the following fields were automatically populated: SSID - dlink Wireless Mode - Infrastructure Channel - Auto Authentication - WPK2-PSK Encryption - TKIP To access the network, the user must know the security passphrase used on the network and enter it in the Key field. The signal strength will be display. The value will be between 1 and 100, 100 being the best/strongest signal. D-Link DCS-5605/DCS-5635 User Manual 39