D-Link DES-3226 Switch Management Module - Page 32
IfPromiscuous Mode
UPC - 790069240560
View all D-Link DES-3226 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
IfHCInBroadcastPkts is the number of packets, delivered by this sub-layer to a higher (sub-) layer, which were addressed to a broadcast address at this sublayer. This object is a 64-bit version of ifInBroadcastPkts. IfHCOutOctets is the total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets. IfHCOutUcastPkts is the total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutUcastPkts. IfHCOutMulticastPkts is the total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifOutMulticastPkts. IfHCOutBroadcastPkts is the total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutBroadcastPkts. IfLinkUpDownTrap Enable indicates whether linkup/linkDown traps should be generated for this interface. By default, this object should have the value enabled (1) or interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise. IfHighSpeed is an estimate of the interface's current bandwidth in units of 1,000,000 bits per second. IfPromiscuous Mode is an object that has a value of false(2) if this interface only accepts packets/frames that are addressed to this station. This object has a value true(1) when the station accepts all packets/frames transmitted on the media. IfConnectorPresent is an object that has the value 'true(1)' if the interface sublayer has a physical connector and the value 'false(2)' otherwise. 28 DES-3226 Management