D-Link DES-5664TX User Guide - Page 36
Telnet Management
UPC - 790069226427
View all D-Link DES-5664TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Fast Ethernet Switching System User's Guide Telnet Management You can manage the DES-5600 via Telnet session. However, first you must assign a unique IP address to the DES-5600. Use Console Management to log into the DES-5600 for the first time so that you can assign an IP address. Once you have assigned an IP address to the DES-5600, you can use the management method of your choice. Telnet management can be done through any of the ports on the switch. You can use any Telnet application that emulates a VT100 terminal. You must install TCP/IP on the workstation before using Telnet. Only one Telnet session can be active at a time. Configuring Through the Ethernet Port Follow these steps to manage the DES-5600 through a Telnet session: 1. Assign an IP address to the DES-5600. 2. Attach one end of an Ethernet cable to one of the Ethernet ports on the DES-5600. 3. Attach the other end of the cable to a workstation. 4. Access the DES-5600 through Telnet. 5. Log into the DES-5600 using your user name and password. The Telnet session will timeout after five minutes. Any changes that have not been saved are lost. Press Enter to reconnect after a timeout. Managing the DES-5600 29