D-Link DES-5664TX User Guide - Page 49
System Configuration
UPC - 790069226427
View all D-Link DES-5664TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Fast Ethernet Switching System User's Guide System Configuration The System Configuration menu, shown in Figure 20, enables you to configure ports, network settings, Spanning Tree, SNMP, address aging, port monitoring, VLAN and Port Trunking. Figure 20: System Configuration Menu Port Configuration The Port Configuration menu enables you to configure individual ports. You can set the speed, duplex mode, enable and disable ports and make other changes. The panels and options may be different, depending on the modules you have installed. Refer to Chapter 4, LEDs, for an explanation of the differences between the modules. Network Configuration This panel is used to configure the IP Address, Subnet Mask, and Default Gateway. Spanning Tree Configuration Enables you to configure Spanning Tree globally for the DES-5600 and on a port by port level. Managing the DES-5600 42