D-Link DES-5664TX User Guide - Page 80

Follow these steps to update software using TFTP.

Get D-Link DES-5664TX - DES 5600 Switch PDF manuals and user guides
UPC - 790069226427
View all D-Link DES-5664TX manuals
Add to My Manuals
Save this manual to your list of manuals

Page 80 highlights

Fast Ethernet Switching System User's Guide 4. You will see a confirmation panel. If you do not want to update software select No and press Enter to return to the previous panel. 5. Go to Transfer on the HyperTerminal menu and select Send File. Browse to the location of the software update and send the file. You will see a panel that shows elapsed time and other information about the software update. Reset the DES-5600 when you see the final update panel. This method can be used over the network or from a remote location. TFTP is done using Telnet. It can be done from a remote location using a TFTP server. The TFTP server and the DES-5600 must be on the same subnet. For example, if the IP address of the DES-5600 is 100.100.100.001 then the TFTP server must have an IP address beginning with 100.100.100. Only the last three digits will be unique to the server and the DES-5600. Remember that two devices cannot have the same IP address. Follow these steps to update software using TFTP. 1. Verify the download mode is TFTP. Use the space bar to toggle between XMODEM and TFTP. 2. Enter the Internet Protocol (IP) address of the TFTP server. 3. Enter the complete path and filename of the software and select Execute. 4. When the transfer is complete, reset the DES-5600 for the changes to take effect. Managing the DES-5600 73

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
Fast Ethernet Switching System User’s Guide
Managing the DES-5600
73
4.
You will see a confirmation panel. If you do not want to update
software select No and press Enter to return to the previous panel.
5.
Go to Transfer on the HyperTerminal menu and select Send File.
Browse to the location of the software update and send the file.
You will see a panel that shows elapsed time and other information
about the software update.
Reset the DES-5600 when you see the final update panel.
This method can be used over the network or from a remote location.
TFTP is done using Telnet. It can be done from a remote location using a TFTP
server. The TFTP server and the DES-5600 must be on the same subnet. For
example, if the IP address of the DES-5600 is 100.100.100.001 then the TFTP
server must have an IP address beginning with 100.100.100. Only the last three
digits will be unique to the server and the DES-5600. Remember that two devices
cannot have the same IP address.
Follow these steps to update software using TFTP.
1.
Verify the download mode is TFTP. Use the space bar to toggle
between XMODEM and TFTP.
2.
Enter the Internet Protocol (IP) address of the TFTP server.
3.
Enter the complete path and filename of the software and select
Execute.
4.
When the transfer is complete, reset the DES-5600 for the changes
to take effect.