D-Link DFL-260E User Manual for DFL-260E - Page 222
Multicast Forwarding - No Address Translation
View all D-Link DFL-260E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 222 highlights
4.6.2. Multicast Forwarding with SAT Multiplex Rules Chapter 4. Routing Figure 4.14. Multicast Forwarding - No Address Translation Note: SAT Multiplex rules must have a matching Allow rule Remember to add an Allow rule that matches the SAT Multiplex rule. The matching rule could also be a NAT rule for source address translation (see below) but cannot be a FwdFast or SAT rule. Example 4.14. Forwarding of Multicast Traffic using the SAT Multiplex Rule In this example, we will create a multiplex rule in order to forward the multicast groups 239.192.10.0/24:1234 to the interfaces if1, if2 and if3. All groups have the same sender 192.168.10.1 which is located somewhere behind the wan interface. The multicast groups should only be forwarded to the out interfaces if clients behind those interfaces have requested the groups using IGMP. The following steps need to be performed to configure the actual forwarding of the multicast traffic. IGMP has to be configured separately. Web Interface A. Create a custom service for multicast called multicast_service: 1. Go to: Objects > Services > Add > TCP/UDP 2. Now enter: • Name: multicast_service • Type: UDP 222