D-Link DFL-260E User Manual for DFL-260E - Page 462
name=AllowL2TP, name=NATL2TP
View all D-Link DFL-260E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 462 highlights
9.5.2. L2TP Servers Chapter 9. VPN • Authentication Source: Local • Interface: l2tp_tunnel • Originator IP: all-nets • Terminator IP: wan_ip 4. Under the Authentication Options tab enter UserDB as the Local User DB 5. Click OK When the other parts are done, all that is left is the rules. To let traffic through from the tunnel, two IP rules should be added. E. Finally, set up the rules: Command-Line Interface First, change the current category to be the main IP rule set: gw-world:/> cc IPRuleSet main Now, add the IP rules: gw-world:/main> add IPRule action=Allow Service=all_services SourceInterface=l2tp_tunnel SourceNetwork=l2tp_pool DestinationInterface=any DestinationNetwork=all-nets name=AllowL2TP gw-world:/main> add IPRule action=NAT Service=all_services SourceInterface=l2tp_tunnel SourceNetwork=l2tp_pool DestinationInterface=any DestinationNetwork=all-nets name=NATL2TP Web Interface 1. Go to: Rules > IP Rules > Add > IPRule 2. Enter a name for the rule, for example AllowL2TP 3. Now enter: • Action: Allow • Service: all_services • Source Interface: l2tp_tunnel • Source Network: l2tp_pool • Destination Interface: any • Destination Network: all-nets 4. Click OK 5. Go to: Rules > IP Rules > Add > IPRule 6. Enter a name for the rule, for example NATL2TP 7. Now enter: • Action: NAT 462