D-Link DFL-260E User Manual for DFL-260E - Page 230
Advanced IGMP Settings, Auto Add Multicast Core Route, IGMP Before Rules
View all D-Link DFL-260E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 230 highlights
4.6.4. Advanced IGMP Settings Chapter 4. Routing 2. Under General enter: • Name: A suitable name for the rule, for example Queries_if2 • Type: Query • Action: Proxy • Output: if2 (this is the relay interface) 3. Under Address Filter enter: • Source Interface: wan • Source Network: UpstreamRouterIp • Destination Interface: core • Destination Network: auto • Multicast Source: 192.168.10.1 • Multicast Group: 239.192.10.0/24 4. Click OK Advanced IGMP Settings There are a number of IGMP advanced settings which are global and apply to all interfaces which do not have IGMP settings explicitly specified for them. 4.6.4. Advanced IGMP Settings Auto Add Multicast Core Route This setting will automatically add core routes in all routing tables for the multicast IP address range 224.0.0.0/4. If the setting is disabled, multicast packets might be forwarded according to the default route. Default: Enabled IGMP Before Rules For IGMP traffic, by-pass the normal IP rule set and consult the IGMP rule set. Default: Enabled IGMP React To Own Queries The firewall should always respond with IGMP Membership Reports, even to queries originating from itself. Global setting on interfaces without an overriding IGMP Setting. Default: Disabled IGMP Lowest Compatible Version IGMP messages with a version lower than this will be logged and ignored. Global setting on interfaces without an overriding IGMP Setting. 230