D-Link DFL-260E User Manual for DFL-260E - Page 231
IGMP Last Member Query Interval, IGMP Query Response Interval
View all D-Link DFL-260E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
4.6.4. Advanced IGMP Settings Chapter 4. Routing Default: IGMPv1 IGMP Router Version The IGMP protocol version that will be globally used on interfaces without a configured IGMP Setting. Multiple querying IGMP routers on the same network must use the same IGMP version. Global setting on interfaces without an overriding IGMP Setting. Default: IGMPv3 IGMP Last Member Query Interval The maximum time in milliseconds until a host has to send an answer to a group or group-and-source specific query. Global setting on interfaces without an overriding IGMP Setting. Default: 5,000 IGMP Max Total Requests The maximum global number of IGMP messages to process each second. Default: 1000 IGMP Max Interface Requests The maximum number of requests per interface and second. Global setting on interfaces without an overriding IGMP Setting. Default: 100 IGMP Query Interval The interval in milliseconds between General Queries sent by the device to refresh its IGMP state. Global setting on interfaces without an overriding IGMP Setting. Default: 125,000 IGMP Query Response Interval The maximum time in milliseconds until a host has to send a reply to a query. Global setting on interfaces without an overriding IGMP Setting. Default: 10,000 IGMP Robustness Variable IGMP is robust to (IGMP Robustness Variable - 1) packet losses. Global setting on interfaces without an overriding IGMP Setting. Default: 2 IGMP Startup Query Count The firewall will send IGMP Startup Query Count general queries with an interval of 231