D-Link DFL-260E User Manual for DFL-260E - Page 254
Custom Options, MAC Address, Client Identified
View all D-Link DFL-260E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 254 highlights
5.2.2. Custom Options parameters: Host MAC Address Client Identified Chapter 5. DHCP Services This is the IP address that will be handed out to the client. This is the MAC address of the client. Either the MAC address can be used or the alternative Client Identified parameter can be used. If the MAC address is not used for identifying the client then the client can send an identifier in its DHCP request. The value of this identifier can be specified as this parameter. The option exists to also specify if the identifier will be sent as an ASCII or Hexadecimal value. Example 5.2. Static DHCP Host Assignment This example shows how to assign the IPv4 address 192.168.1.1 to the MAC address 00-90-12-13-14-15. The examples assumes that the DHCP server DHCPServer1 has already been defined. Command-Line Interface 1. First, change the category to the DHCPServer1 context: gw-world:/> cc DHCPServer DHCPServer1 2. Add the static DHCP assignment: gw-world:/> add DHCPServerPoolStaticHost Host=192.168.1.1 MACAddress=00-90-12-13-14-15 3. All static assignments can then be listed and each is listed with an index number: gw-world:/> show # Comments - ------+ 1 (none) 4. An individual static assignment can be shown using its index number: gw-world:/> show DHCPServerPoolStaticHost 1 Property ----------- Index: Host: MACAddress: Comments: Value 1 192.168.1.1 00-90-12-13-14-15 (none) 5. The assignment could be changed later to IP address 192.168.1.12 with the following command: gw-world:/> set DHCPServerPoolStaticHost 1 Host=192.168.1.12 MACAddress=00-90-12-13-14-15 Web Interface 1. Go to: System > DHCP > DHCP Servers > DHCPServer1 > Static Hosts > Add > Static Host Entry 2. Now enter: • Host: 19.168.1.1 • MAC: 00-90-12-13-14-15 3. Click OK 254