D-Link DGS-1224T Product Manual - Page 31
Community Setting, Public, Private, Trap Setting, Setting up a Trap, Enable - mib
UPC - 790069264467
View all D-Link DGS-1224T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
5 Configuration D-Link Web Smart Switch User Manual Figure 43 - System > SNMP Setting Community Setting: In support of SNMP version 1, the Web-Smart Switch accomplishes user authentication by using Community Settings that function as passwords. The remote user SNMP application and the Switch SNMP must use the same community string. SNMP packets from a station that are not authenticated are ignored (dropped). The default community strings for the Switch used for SNMP v.1 management access are: Public: The community with read-only privilege allows authorized management stations to retrieve MIB objects. Private: The community with read/write privilege allows authorized management stations to retrieve and modify MIB objects. Trap Setting: Traps are messages that alert network personnel of events that occur on the Switch. Such events can be as serious as a reboot (someone accidentally turned the Switch OFF), or less serious events such as a port status change. The Switch can generate traps and send them to the trap recipient (i.e. network administrator). Setting up a Trap: Select Enable, enter a Trap Name, add the IP of the device to be monitored, and choose the event(s) to trap. The available trap Events to choose from including: System Device Bootup Fiber Link Up / Link Down Fiber Abnormal Receive Error Fiber Abnormal Transmit Error Twisted Pair Link Up / Link Down Twisted Pair Abnormal Receive Error Twisted Pair Abnormal Transmit Error Note: Trap Name must be selected from a Community Name 27