D-Link DGS-1224T Product Manual - Page 37
Configuration > 802.1D Spanning Tree - vlan configuration
UPC - 790069264467
View all D-Link DGS-1224T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
5 Configuration D-Link Web Smart Switch User Manual Figure 57 - Configuration > IGMP Router port Settings To view the Multicast Entry Table for a given VLAN, press the View button. Figure 58 - Configuration > IGMP Multicast Entry Table Configuration > 802.1D Spanning Tree 802.1D Spanning Tree Protocol (STP) implementation is a backup link(s) between switches, bridges or routers designed to prevent network loops that could cause a broadcast storm. When physical links forming a loop provide redundancy, only a single path will be forwarding frames. If the link fails, STP activates a redundant link automatically. Figure 59 - Configuration > Spanning Tree By default, Spanning Tree is disabled. If enabled, the Switch will listen for BPDU packets and its accompanying Hello packet. BPDU packets are sent even if a BPDU packet was not received. Therefore, each link between bridges is sensitive to the status of the link. Ultimately this difference results in faster 33