D-Link DSL-302G Quick Installation Guide - Page 5
DO NOT, after - driver
 |
View all D-Link DSL-302G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
If you are connecting to the modem using Ethernet cable, connect the Ethernet cable and click on Next If you are going to connect to the modem via USB cable, DO NOT connect the USB cable at this stage. You will need to connect the USB cable after finishing the software installation and rebooting the computer. * If you connected the USB cable before installing the driver please refer to paragraph 3.1.1. of the Troubleshooting section at the end of this guide. Click on Next
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11
 |
 |
If you are connecting to the modem using Ethernet cable, connect the Ethernet cable and click on
Next
If you are going to connect to the modem via USB cable,
DO NOT
connect the USB cable at this stage.
You will need to connect the USB cable
after
finishing the software installation and rebooting the
computer.
* If you connected the USB cable before installing the driver please refer to paragraph
3.1.1.
of the
Troubleshooting section at the end of this guide.
Click on
Next