D-Link DSM-10 Manual - Page 18
Step 8, Enter, Select Connection Mode, Enter Static IP, If DHCP is disabled on your router
View all D-Link DSM-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Section 2 - Installation Step 8 - Use the on-screen keyboard to enter the wireless security password. Select Enter and then press the OK button on your remote. Note: The password is case-sensitive and must be entered the same as on your router or access point. If DHCP is disabled on your router, from the Select Connection Mode screen, select Enter Static IP to manually enter the network settings for your DSM-312 (refer to the If DHCP is disabled on your router section on page 16). You should now be connected to your wireless network and the Home page will be displayed on your TV. Note: If for some reason the DSM-312 does not connect to your network, it may be out of range. Move the DSM-312 closer to your router or access point (in the same room) and repeat the setup steps. Once connected, try moving the DSM-312 back near your TV. D-Link DSM-312 User Manual 14