Dell Alienware 18 Owner's Manual - Page 44
Replacing the mSATA Card, Procedure, Postrequisites
View all Dell Alienware 18 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Replacing the mSATA Card WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 11. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Procedure 1 Insert the mSATA card connector at a 45-degree angle into the system- board connector. 2 Press the other end of the mSATA card down into the slot on the system board and replace the screw that secures the mSATA card to the system-board connector. Postrequisites 1 Replace the battery pack. See "Replacing the Battery Pack" on page 17. 2 Replace the base cover. See "Replacing the Base Cover" on page 15.au 3 Follow the instructions in "After Working Inside Your Computer" on page 13. 44 | Replacing the mSATA Card