Dell Alienware Area-51 R4 Alienware Area-51 R5 Service Manual - Page 114
Power Management Setup, Integrated Devices
View all Dell Alienware Area-51 R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Advanced BIOS Auto-Recovery Always Perform Integrity Check CPU configuration Hyper-threading Technology Intel (R) SpeedStep (tm) Virtualization VT for Direct I/O Active Processor Cores Integrated Devices Front USB Port Rear USB Port ASMedia XHC Controller HD Audio Integrated NIC1 Integrated NIC2 Pxe Option SATA Mode PCIE GEN3 Power Management Setup AC Recovery Deep Sleep Control Auto Power On Numlock Key 114 Enable the user to recover from certain corrupted BIOS conditions from a recovery file on the user primary hard drive. Default: Disabled. Allows you to perform the Integrity check. Default: Disabled. Enable or disable HyperThreading in the processor. Default: Enabled. Enable or disable Intel Speedstep Technology. Default: Enabled. NOTE: If enabled, the processor clock speed and core voltage are adjusted dynamically based on the processor load. Allows you to enable or disable the Intel Virtualization technology. Default: Enabled Specify whether a Virtual Machine Monitor (VMM) can utilize the additional hardware capabilities provided by Intel Virtualization Technology for Direct I/O. Default: Enabled. Allows you to enable or disable the front USB ports. Default: Enabled. Allows you to enable or disable the rear USB ports. Default: Enabled. Allows you to enable or disable the XHC controller. Default: Enabled. Allows you to enable or disable the integrated audio controller. Default: Enabled. Allows you to enable or disable the NIC1. Default: Enabled. Allows you to enable or disable the NIC2. Default: Enabled. Allows you to enable or disable the boot option for legacy network devices. Default: Disabled. Allows you to configure the operating mode of the integrated SATA hard drive controller. Default: Inte Smart Response Technology. Allows you to enable or disable the PCIE GEN3. Default: Disabled. Sets what action the computer takes when power is restored. Default: Last State. Allows you to define the controls when Deep Sleep is enabled. Default: Enabled in S5 Only. Enable to set the computer to turn on automatically every day or on a preselected date and time. This option can be configured only if the Auto On Time is set to Everyday, Weekdays, or Selected Days. Default: Disabled. Enable or disable Numlock. Default: Enable Numlock.