Dell Alienware Area-51 R4 Alienware Area-51 R5 Service Manual - Page 63
Removing the logo board, Prerequisites, Procedure
View all Dell Alienware Area-51 R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Removing the logo board NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites 1. Remove the stability foot. 2. Remove the left and right side-panels. See "Removing the side panels". 3. Remove the top fan. Procedure NOTE: Note the routing of all cables as you remove them so that you can route them correctly after you replace the logo board. 1. Disconnect all the cables from the logo board. 2. Remove the screw (#6-32x6) that secures the logo board to the chassis. 3. Slide the logo board out of the chassis. 63