Dell Alienware Area-51 R4 Alienware Area-51 R5 Service Manual - Page 51
NOTE: The location of the power supply connector VGA1, VGA2
View all Dell Alienware Area-51 R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
3. Disconnect the power cables from the graphics card. 4. Rotate and open the PCIE door. 5. Press and hold the securing tab on the clamp. 6. Pull the clamp away from the bracket. NOTE: The location of the power supply connector (VGA1, VGA2, and VGA3) varies depending on the video card installed. 7. Press and hold the securing tab on the graphics-card connector, grasp the card by its top corner. 8. Lift the graphics card from the graphics-card slot. 51
3.
Disconnect the power cables from the graphics card.
4.
Rotate and open the PCIE door.
5.
Press and hold the securing tab on the clamp.
6.
Pull the clamp away from the bracket.
NOTE: The location of the power supply connector (VGA1, VGA2, and VGA3) varies depending on the video card
installed.
7.
Press and hold the securing tab on the graphics-card connector, grasp the card by its top corner.
8.
Lift the graphics card from the graphics-card slot.
51