Dell Alienware Area-51 R4 Alienware Area-51 R5 Service Manual - Page 37
Replacing the left AlienFX side-panel connector, Procedure, Post-requisites
View all Dell Alienware Area-51 R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Replacing the left AlienFX side-panel connector NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure 1. Route the cable through the slot on the bracket and align the screw holes on the left AlienFX side-panel connector with the screw holes on the bracket. 2. Replace the two screws (#6-32x6) that secure the AlienFX side-panel connector to the bracket. 3. Align the screw hole on the left AlienFX side-panel connector with the screw hole on the chassis. 4. Replace the screw (#6-32x6) that secures the left AlienFX side-panel connector to the chassis. 5. Route the AlienFX side-panel cable through the routing guides on the chassis 6. Turn the chassis over. 7. Route the cable through the securing clip and through the slot on the chassis. 8. Connect the cable that connects the left AlienFX side-panel connector to the system board. See "I/O-board components". Post-requisites 1. Replace the left and right side-panels. See "Replacing the side panels". 2. Replace the stability foot. 37