Dell Alienware Area-51 R4 Alienware Area-51 R5 Service Manual - Page 44
Replacing the memory modules, Procedure, Post-requisites
View all Dell Alienware Area-51 R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Replacing the memory modules NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure 1. Align the notch on the memory module with the tab on the memory-module slot. 2. Insert the memory module into the memory-module connector until the memory module snaps into position and the securing clip locks in place. NOTE: The securing clips return to the locked position. If you do not hear the click, remove the memory module and reinstall it. Post-requisites 1. Replace the left and right side-panels. See "Replacing the side panels". 2. Replace the stability foot. 44