Dell E521 Owner's Manual - Page 74
Onboard Devices, Integrated, Audio, and then change the setting
UPC - 015561600385
View all Dell E521 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
2 3 4 1 1 front I/O panel connector 4 sound card connector 2 jumper 3 sound card cable If you are installing a sound card, remove the jumper on the end of the front I/O panel. Then connect one end of the cable to the sound card and the other end of the cable to the connection on the front I/O panel from which you removed the jumper. NOTICE: To connect a network cable, first plug the cable into the network device and then plug it into the computer. 10 Replace the computer cover, reconnect the computer and devices to electrical outlets, and then turn them on. 11 If you installed a sound card: a Enter system setup (see "System Setup" on page 111), go to Onboard Devices and select Integrated Audio, and then change the setting to Off. b Connect external audio devices to the sound card's connectors. Do not connect external audio devices to the microphone, speaker/headphone, or line-in connectors on the back panel. See "Back Panel Connectors" on page 14. 74 Removing and Installing Parts