Dell E521 Owner's Manual - Page 98
Installing a Media Card Reader, new Media Card Reader.
UPC - 015561600385
View all Dell E521 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Installing a Media Card Reader NOTE: In the event that the replacement or new Media Card Reader does not have shoulder screws, use the screws located within the drive panel insert. Otherwise, reuse the screws attached to the card reader that you are replacing. 1 2 1 Media Card Reader 2 screws (4) 1 Follow the procedures in "Before You Begin" on page 61. 2 Remove the drive panel (see "Removing the Drive Panel" on page 81). 3 If this is a new card reader installation: • Remove the drive panel insert (see "Removing the Drive-Panel Insert" on page 83). Remove the four shoulder screws from the drive panel insert. • Remove the Media Card Reader from its packaging. • Remove the shoulder screws from the inside of the drive-panel insert and attach the screws to the new Media Card Reader. 4 Gently slide the Media Card Reader into place until you feel a click or feel the drive securely installed. Ensure that the Media Card Reader is installed before the FlexBay cable is connected. 5 Connect the USB cable to the back of the Media Card Reader and to the USB connector on the system board (see "System Board Components" on page 65). 98 Removing and Installing Parts