Dell Latitude D610 Service Manual - Page 36
Installing the System Board
View all Dell Latitude D610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
1 M2.5 x 4-mm screws (4) 2 PCMCIA card cage 12. Turn the computer over and remove the five M2 x 3-mm screws labeled "B" that secure the system board assembly to the computer base. 1 M2 x 3-mm screws (5) 13. Pull out the system board assembly starting from the front of the palm rest. 1 system board assembly 2 computer base Installing the System Board 1. Follow all of the steps in "Removing the System Board" in reverse order. NOTICE: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. 2. Turn on the computer. NOTE: After replacing the system board, enter the computer Service Tag into the BIOS of the replacement system board. 3. Insert the CD that accompanied the replacement system board into the appropriate drive. Follow the instructions that appear on the screen. Back to Contents Page