Dell PowerConnect W-IAP175P Installation Guide - Page 6

Table 3 W-IAP175P LED Status Indicators (Continued) LED RSSI (Radio 0) Function Indicator RSSI Level for Radio 0 Off 4 Step Progressive Bars (Red) 25/50/75/100% RSSI (Radio 1) RSSI Level for Radio 1 Off 4 Step Progressive Bars (Blue) 25/50/75/100% Status RSSI disabled/no signal Each bar represents a progressive increase in signal strength, with 4 bars representing maximum signal strength (100%). Minimum data rate: One lit LEDs Maximum data rate: Four lit LEDs RSSI disabled/no signal Each bar represents a progressive increase in signal strength, with 4 bars representing maximum signal strength (100%). Minimum data rate: One lit LEDs Maximum data rate: Four lit LEDs W-IAP175AC LED Status Indicators The W-IAP175 include visual indicators for power, link, heat and radio status. Additionally, each radio has a fourLED array that indicates received signal strength (RSSI). NOTE: The RSSI LED indicators represent varying degrees in the RSSI level. The absence of a signal is indicated by no LED response, and full signal strength is indicated when all four LEDs are active and lit. Figure 3 LED Layout RSSI for Radio 0 P/S POE HEAT ENT RSSI for Radio 1 Table 4 lists the meanings of the LEDs on the W-IAP175AC outdoor access points. Table 4 W-IAP175AC LED Status Indicators LED Function Indicator Status P/S AP Power/Ready Off No power to AP Status Blinking Device booting, not ready On Device ready 6 Dell PowerConnect W-IAP175 Outdoor Instant Access Point | Installation Guide