Dell PowerConnect W-IAP3WN Dell Instant 6.2.0.0-3.2.0.0 User Guide - Page 174

Figure 125 - Radio Profile 1. Navigate to RF which is at the top right corner of the Dell W-Series Instant UI. 2. Click Show advanced options to view the Radio tab. 3. Refer to the table below to configure the radio settings for bands 2.4 GHz and 5 GHz. Table 24 - Radio Profile Configuration Parameters Parameter Legacy only 802.11d / 802.11h Description Enable to run the radio in non-802.11n mode. This is disabled by default. Enable the radio to advertise its 802.11d (Country Information) and 802.11h (Transmit Power Control) capabilities. This is disabled by default. Beacon interval Enter the Beacon period (60ms to 500ms) for the WIAP in msec. This indicates how often the 802.11 beacon management frames are transmitted by the access point. The default value is 100 msec. Interference immunity level Select to increase the immunity level to improve performance in high-interference environments. The default immunity level is 2. NOTE: Increasing the immunity level makes the AP slightly "deaf¨ to its surroundings, causing the AP to lose a small amount of range. 174 | Adaptive Radio Management Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide