Dell PowerConnect W-IAP3WN Dell Instant 6.2.0.0-3.2.0.0 User Guide - Page 187
Ethernet Downlink, Ethernet Downlink Overview, Ethernet Downlink Profile Parameters
View all Dell PowerConnect W-IAP3WN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
Chapter 20 Ethernet Downlink Ethernet Downlink Overview The Ethernet downlink ports allow third party devices such as VoIP phones or printers (which support only wired connections) to connect to the wireless network. Additionally, an Access Control List (ACL) can be configured for added security on the Ethernet downlink. NOTE: This release of W-Instant supports only the OpenAuth mechanism. Ethernet Downlink Profile Parameters To create a new Ethernet downlink profile: 1. Click on the Wired link on the top right corner of the W-Instant. 2. Click on the New button below the Wired Networks window and enter the following information in the Wired tab. Table 30 - Ethernet Downlink Profile Parameters - Wired Tab Field Name Description Name of the Ethernet downlink profile. Primary Usage Speed/Duplex l Employee - Employee access. l Guest- Guest access. Only experienced network administrators should change the speed and duplex parameters manually. When enabled, the system passes electric power along with the data on the Ethernet cable. POE NOTE: The Power Sourcing Equipment (PSE) functionality is available only for the Ethernet port2 on W-IAP3WNP. Admin Status Displays the status of the admin. The following figure displays the wired parameters of the Ethernet profile configuration: Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide 187 | Ethernet Downlink