Dell PowerEdge XL 5133-4 Dell PowerEdge M I/O Aggregator Getting Started Guide - Page 18

Installing the Aggregator in a PowerEdge Chassis After you unpack the Aggregator, install FlexIO modules in the base module and slide the Aggregator into one of the open I/O module slots in the back of a PowerEdge M1000e chassis. NOTE: If you plug a FlexIO module into an Aggregator that is already powered on and inserted in an M1000e chassis, you must reboot the Aggregator for the plugin module to be activated. The M1000e chassis is a 10U rack-mountable blade chassis that holds: • Server blades: Eight full-height or 16 half-height, or 32 quarter-height blades • Switch blades: Six I/O modules and two integrated chassis management controllers Server blades are installed in the front of the chassis (Figure 1-7); I/O modules are installed in the back of the chassis (Figure 1-8). Figure 1-7. PowerEdge M1000e: Front View with Server Blades 16 half-height server blades 18 Installing and Configuring the Aggregator