Denon AVR 2809CI Owners Manual - English - Page 32

Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting Specifications • When the menu "Speaker Configuration" - "Surround Back Speaker" setting (vpage 27) is set to "1spkr", the surround back speaker display is set to "SB". • Speakers set to "None" in the "Speaker Configuration" settings are not displayed. • When "Channel Level" is adjusted, the adjusted values are set for all the surround modes. To adjust the channel level separately for the different surround modes, use the operation see page 59. g Crossover Frequency Select crossover frequency from which subwoofer handles low range signal. [Selectable items] 40Hz 60Hz 80Hz 90Hz 100Hz 110Hz 120Hz 150Hz 200Hz 250Hz : Only the portion of the bass sound of the various speakers output from the subwoofer that has a frequency below the frequency set here is output. Set this according to the low frequency reproduction capabilities of the speakers you are using. Advanced : Set the crossover frequency separately for the different speakers. • If in the "Advanced" settings, "Subwoofer Setup" (vpage 28) in the menu is set to "LFE", it is possible to make this setting for speakers set to "Small" at "Speaker Configuration". If set to "LFE+Main", this setting can be made regardless of the speaker size. • For speakers set to "Small", sound below the crossover frequency is cut from the sound output. The cut bass sound is output from the subwoofer or front speakers. • Always set the crossover frequency to "80 Hz". When using small speakers, however, we recommend setting the crossover frequency to a higher frequency. h Front Speaker Setup Select front speakers to use for each surround mode. [Selectable items] Normal : To change the settings, select "Custom". Custom : When set to "Custom", you can select beforehand the front speaker to use for each surround mode. [Selectable items] DIRECT/STEREO : A B A+B MULTI CH : A B A+B NOTE When set to "Custom", SPEAKERS does not operate. HDMI Setup Make settings for HDMI video/audio output. F Menu screen F 2.Manual Setup 1.Speaker Setup 2.HDMI Setup 3.Audio Setup 4.Zone Setup 5.Option Setup 2-2.HDMI Setup Color Space YCbCr RGB Range Normal Auto Lipsync ON : OFF 2-2.HDMI Setup HDMI Audio Out AMP HDMI Control ON : OFF Power Off Control ON : OFF a Color Space Make settings for output color space. [Selectable items] YCbCr : O utput using YCbCr format. RGB : O utput using RGB format. When connected to a monitor with a DVI-D connector (HDCP compatible) using an HDMI/DVI converter cable, the signals are output in RGB format, regardless of this setting. s RGB Range Make settings for RGB output range. [Selectable items] Normal : U se video range from 16 (black) to 235 (white). Enhanced : V ideo range from 0 (black) to 255 (white). Use this setting to avoid black washout. When "YCbCr" is selected under "Color Space", "RGB Range" will have no effect. d Auto Lipsync Automatic compensation for timing shift in audio and video output. [Selectable items] ON OFF 29 For details on how to select, set and cancel settings for each menu, see "Menu Operations" (vpage 20).