Denon AVR 2809CI Owners Manual - English - Page 60

Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting Specifications Other Operations and Functions Symbols used to indicate buttons in this manual Button located on both the main unit and the remote control unit Button only on the main unit Button only on the remote control unit BUTTON [BUTTON] SOURCE SELECT INPUT MODE Surround mode [ AMP] INPUT MODE Surround mode Other Operations Playing Super Audio CD 1 Assign the HDMI input connector at the "HDMI In" setting (vpage 38). 2 Either turn or press [SOURCE SELECT] to select the input source assigned in step 1. The " " indicator lights on the display. 3 Press INPUT MODE to select "AUTO" (vpage 37). Select the input mode according to the program source to be played. 4 Select the surround mode (vpage 40 ~ 42). We recommend playing in the DIRECT mode. 5 Start playing the Super Audio CD. The " " indicator lights on the display. For operating instructions, refer to the respective equipment's operating instructions. Recording on an External Equipment (REC OUT mode) You can listen to one program source while recording a different program source. 1 Press until "ZONE2 Source". b The ZONE2 or ZONE3 selection mode changes each time you press the button, and "ZONE2 Source" or "ZONE3 Source" is displayed. 2 Turn until "RECOUT Source" is displayed. The " " indicator lights. n During ZONE2 Rec Select ZONE2 Source ZONE2 TUNER ···· ZONE2 SIRIUS RECOUT SIRIUS RECOUT TUNER RECOUT Source 3 Turn to choose the input source to be recorded. • When playing DSD signals in the DIRECT or PURE DIRECT mode, the DSD signals are converted as such into analog signals. When playing in other surround modes, the DSD signals are first converted into PCM format, then into analog signals. • "DSD DIRECT" is shown on the display when playing DSD 2-channel signals in the DIRECT mode. "DSD MULTI DIRECT" is shown on the display when playing DSD multi-channel signals in the DIRECT mode. 4 Play the program source. For operating instructions, refer to the respective equipment's operating instructions. To record FM or AM broadcasts, select the broadcast (vpage 51). 5 Start recording. For operating instructions, refer to the respective equipment's operating instructions. SOURCE SELECT