Denon AVR 2809CI Owners Manual - English - Page 45

Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting Specifications r Stereo Playback Parameter Selecting the mode Select by press DIRECT/STEREO. [Selectable items] STEREO : This is the mode for playing in stereo. The tone can be adjusted. Sound is output from the front left and right speakers and subwoofer. Symbols used to indicate buttons in this manual Button located on both the main unit and the remote control unit Button only on the main unit Button only on the remote control unit BUTTON [BUTTON] Adjusting the parameters 1 Press MENU. The menu is displayed. b To operate from the main remote control unit, be sure to set the remote control unit to the AMP mode. When DIRECT/STEREO is pressed, DIRECT mode can be switched to STEREO mode. 2 uiop DYNAMIC VOLUME Press ui to select "Parameter", then press ENTER. RESTORER AUDIO DELAY Playback in the PURE DIRECT Mode 3 To change the setting: Press ui to select the item you want to change, then press o p to change the setting. This is the mode that recreates the original sound most faithfully, providing extremely high quality sound. Press PURE DIRECT. b To return to the previous item, press RETURN. b Select "Default Yes", then press o to reset to the default setting. 4 Press ENTER to enter the setting. • To cancel, press PURE DIRECT again. STANDARD • When in the PURE DIRECT mode, the on-screen display is not MENU displayed and the display on the main unit is turned off. • If the HDMI input connector is selected, video outputs are output in the PURE DIRECT mode. [ AMP] • The channel level and surround parameters mode are the same as in the DIRECT mode. in the PURE DIRECT DYNAMIC VOLUME MULTEQ XT ENTER RETURN MULTEQ XT STANDARD n To exit adjustment Press MENU during adjustment. AUDIO DELAY MENU RESTORER [NIGHT] ENTER uiop RETURN