Denon AVR 2809CI Owners Manual - English - Page 36

Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting Specifications For details, see "Amp Assign / Multi-zone Connections and Operations" (vpage 67, 68). s Volume Control Set the MAIN ZONE volume setting. Volume Limit Make a setting for maximum volume. [Selectable items] OFF : Do not set a maximum volume. -20dB : Set the maximum volume to -20 dB. -10dB : Set the maximum volume to -10 dB. 0dB : Set the maximum volume to 0 dB. Power On Level This sets the volume set when the MAIN ZONE's power is turned on. [Selectable items] Last : Use the memorized setting from the last session. - - - : Always use the muting on condition when power is turned on. [Variable range] -80dB ~ +18dB : Set the volume level when the power is turned on in units of 1 dB. Mute Level This sets the amount of attenuation of the volume when the mute mode is set in the MAIN ZONE. [Selectable items] Full : The sound is cut off entirely. -40dB : The sound is attenuated by 40 dB. -20dB : The sound is attenuated by 20 dB. d Source Delete Remove input sources that are not used from the display. [Selectable items] ON : Use this source. Delete : Do not use this source. Default Reset the settings to the default values. NOTE • Input sources being used in the various zones cannot be deleted. • Input sources set to "Delete" cannot be selected using SOURCE SELECT. f On-Screen Display Make on-screen display related settings. See page 9 for more information on onscreen displays due to input signals. Screensaver Make screensaver settings. Use the screensaver to prevent burn-in on the monitor screen. When set to "ON", the screensaver is activated if there is no activity for about 3 minutes. [Selectable items] ON : A ctivate the screensaver if there is no activity for about 3 minutes. OFF : T urn the screensaver function off. When "Screensaver" is set to "ON", the screensaver is activated if no operation is performed for about 3 minutes. When you press uio p, the screensaver is cancelled and the screen before that screensaver started is displayed. Text Input source and mode display. Master Volume Master volume display during adjustment. [Selectable items] ON : T urn display on. OFF : T urn display off. Tuner Information This sets the time the on-screen display is displayed when a tuner operation is performed. [Selectable items] Always : Show display continuously. 30sec : Show display for 30 seconds after operation. 10sec : Show display for 10 seconds after operation. OFF : Turn display off. iPod Information This sets the time the on-screen display is displayed when an iPod operation is performed. [Selectable items] Always : Show display continuously. 30sec : Show display for 30 seconds after operation. 10sec : Show display for 10 seconds after operation. OFF : Turn display off. Display Mode Select the on-screen display's display mode. [Selectable items] Mode1 : If there is no video signal, flickering of the on-screen display is not prevented. Mode2 : P revents flickering of the on-screen display when there is no video signal. Use this mode if the on-screen display does not appear in the Mode 1, as may happen according to the TV being used. [Selectable items] ON : T urn display on. OFF : T urn display off. 33 For details on how to select, set and cancel settings for each menu, see "Menu Operations" (vpage 20).