Dewalt DC618K Instruction Manual - Page 9

English 644429-00,DC612 7/10/06 11:56 AM Page 7 1. Align one of the rubber tabs (Y) from the new return cord assembly with the corresponding slot in the driver (Fig. 18). 2. With your finger, push and bend the rubber tab around corner (Fig. 18) while pulling the rubber cord until tab is firmly in place (Fig. 19). FIG. 18 Y FIG. 19 3. Repeat above procedure for other rubber cord. TO REASSEMBLE NAILER 1. Insert the tip of the driver/return assembly blade into the matching hole in the nosepiece (Fig. 20). FIG. 20 FIG. 21 FIG. 22 Z AA BB AA 2. Move contact trip (Z) to the side while pulling back on the return cord assembly (Fig. 21). 3. Engage the hooks (AA) on the return cord assembly to the notch (BB) in the metal structure then push down to snap into detents (Fig. 22). 4. Slide the driver/return assembly (R) toward the nosepiece and hold. 5. Insert activiation arm assembly by first engaging the cam pin (U) to the solenoid; then align the pivot holes (W) to the metal structure (Fig. 13). 6. Slide the pin (Q) through the metal structure, capturing the activation arm assembly and spring. 7. Ensure the activation arm is fully engaged as shown in Figure 23. 8. Replace the cover to housing, insert 3 T25 slotted screws and tighten. FIG. 23 Accessories Recommended accessories for use with your tool are available at extra cost from your local dealer or authorized service center. If you need assistance in locating any accessory, please contact DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286, call 1-800-4-DEWALT (1-800433-9258) or visit our website www.dewalt.com. CAUTION: The use of any other accessory not recommended for use with this tool could be hazardous. Three Year Limited Warranty DEWALT will repair, without charge, any defects due to faulty materials or workmanship for three years from the date of purchase. This warranty does not cover part failure due to normal wear or tool abuse. For further detail of warranty coverage and warranty repair information, visit www.dewalt.com or call 1-800-4-DEWALT (1-800-433-9258). This warranty does not apply to accessories or damage caused where repairs have been made or attempted by others. This warranty gives you specific legal rights and you may have other rights which vary in certain states or provinces. In addition to the warranty, DEWALT tools are covered by our: 1 YEAR FREE SERVICE DEWALT will maintain the tool and replace worn parts caused by normal use, for free, any time during the first year after purchase. 2 YEARS FREE SERVICE ON XRP™ BATTERY PACKS DC9096, DC9091 and DC9071 90 DAY MONEY BACK GUARANTEE If you are not completely satisfied with the performance of your DEWALT Power Tool, Laser, or Nailer for any reason, you can return it within 90 days from the date of purchase with a receipt for a full refund - no questions asked. LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products sold in Latin America, see country specific warranty information contained either in the packaging, call the local company or see website for warranty information. FREE WARNING LABEL REPLACEMENT: If your warning labels (Fig. 24) become illegible or are missing, call 1-800-4DEWALT for a free replacement. 7