Dewalt DW074KD Instruction Manual - Page 9

English Laser Enhancement Glasses Digital Laser Detector: DW0742 Some laser kits include a pair of FIG. 5 Laser Enhancement Glasses (Fig. 5). (Fig. 7, 8) FIG. 7 Some laser kits include a DEWALT These red lens glasses improve the visibility of the laser beam under bright light conditions or over long distances when the laser is used for Digital Laser Detector. The DEWALT P Digital Laser Detector allows you to J locate a laser beam emitted by a Q rotary laser in bright light conditions interior applications. These glasses or over long distances. The detector are not required to operate the laser. can be used in both indoor and CAUTION: These glasses are not ANSI approved safety glasses outdoor situations where it is difficult and should not be worn while operating other tools. These glasses to see the laser beam. N O do not keep the laser beam from entering your eyes. The detector is not for use with non- DANGER: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, NEVER STARE DIRECTLY INTO THE LASER BEAM, rotating lasers but is compatible with most rotary red-beam or infrared K WITH OR WITHOUT THESE GLASSES. (invisible) beam lasers on the market. Target Card Some laser kits include a Laser Target Card (Fig. 6) to aid in locating and marking the laser beam. The target card enhances the visibility of the laser beam as the beam crosses over the card. The card is marked with standard and metric scales. The laser beam passes through the red plastic and reflects off of the reflective tape on the reverse side. The magnet at the top of the card is designed to hold the target card to ceiling track or steel studs to determine plumb and level FIG. 6 The detector gives both visual signals through the display window (J) and FIG. 8 audio signals through the speaker (K) to indicate the location of the laser beam. The DEWALT Digital Laser Detector Q can be used with or without the detector clamp. When used with the clamp, the detector can be positioned on a grade rod, leveling pole, stud or post. L positions. For best performance when using the BATTERIES (FIG. 7) Target Card, the DEWALT logo should be facing you. The digital laser detector is powered M by a 9-volt battery. To install the battery provided, lift up on the battery compartment cover (L). Place the 7