Dewalt DWMIIIFS Instruction Manual - Page 7
Using The Tool, Maintenance, Maintaining The Pneumatic Tool
View all Dewalt DWMIIIFS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
BEFORE HANDLING OR OPERATING THIS TOOL WARNING: I. READ AND UNDERSTAND THE WARNINGS CONTAINED IN THIS MANUAL. II. REFER TO "TOOL SPECIFICATIONS" IN THIS MANUAL TO IDENTIFY THE OPERATING SYSTEM ON YOUR TOOL. IN ADDITION TO THE OTHER WARNINGS CONTAINED IN THIS MANUAL OBSERVE THE FOLLOWING FOR SAFE OPERATION WARNING: • Use the DeWALT pneumatic tool only for the purpose for which it was designed. • Never use this tool in a manner that could cause a fastener to be directed toward the user or others in the work area. • Do not use the tool as a hammer. • Always carry the tool by the handle. Never carry the tool by the air hose. • Do not alter or modify this tool from the original design or function without approval from DeWALT. • Always be aware that misuse and improper handling of this tool can cause injury to yourself and others. • Before using the tool, verify that the actuator is in the non-actuated position. With the tool disconnected from the air supply, depress the actuator and confirm it returns to the non-actuated position. • Never leave a tool unattended with the air hose attached. • Do not operate this tool if it does not contain a legible WARNING LABEL. • Do not continue to use a tool that leaks air or does not function properly. Notify your nearest DeWALT representative if your tool continues to experience functional problems. Using the Tool 1. Position the tool on the tongued edge of the flooring strip aligning the driver guide against the front of the flooring strip. 2. Hold the handle firmly and strike the rubber cap sharply with the rubber end of the mallet. The tool will then drive the staple. DO NOT USE THE METAL END OF THE MALLET TO STRIKE THE RUBBER CAP, use the rubber end only. MAINTENANCE MAINTAINING THE PNEUMATIC TOOL WARNING: Disconnect air line from tool and remove fasteners from magazine before making adjustments or repairs. 7- ENG