EMC CX300 Initialization Guide - Page 10
Setting Up Dial-Up Networking Windows NT 4.0 Environment - sps
View all EMC CX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Setting Up the Service Laptop What Next? 2. Configure the serial connection for remote access (RAS) by doing the following: a. In the Add RAS Device dialog box, select the dialup networking serial cable with the correct COM port noted in step 1i. b. Click OK. 3. From the Remote Access Setup dialog box, select the dialup networking serial cable with the correct COM port. 4. Click Configure. 5. In the Port Usage dialog box, select dial out only. 6. Click OK. 7. Click Continue to restart the computer. 8. When prompted to reboot, click Yes. The computer reboots. Continue to the next section. Setting Up Dial-Up Networking (Windows NT 4.0 Environment) 1. Double-click My Computer, then double-click Dial-Up Networking. 2. Click New... to create a phonebook entry. One entry will suffice for all the SPs you want to set up. 3. Assign a name to the new entry (for example, CX700_connection). 4. Leave the Phone number field blank. 5. Set the Dial using: field to Dial-Up Networking between 2 PCs (COMn). 6. Click Configure... and do the following from the Modem Configuration dialog box: a. Set the Initial speed (bps) to 115200. b. Check only the following items: Enable hardware flow control and Disable modem speaker. c. Click OK to exit the Modem Configuration dialog box. 10 EMC CLARiiON CX300, CX500, and CX700 Initialization Guide