EMC CX300 Initialization Guide - Page 20

Initializing the Storage System 12. Specify the following for SP B: a. IP address b. Hostname c. Subnet mask d. Gateway address for SP B e. Peer IP address for SP A f. If desired, for example, for added security (see the caution below), change the management port setting to 2162/2163. ! CAUTION Be sure that this is the management port whose setting you want to change. If you later want to change it back, you must remove the node from its domain before you can change its port setting from the default. If you do change the management port setting, you will need to append the URL with :2162 whenever you want to manage the storage system. For a description of Navisphere 6.X security features, refer to the EMC Navisphere Version 6.X Security Administrator's Guide. 13. Verify that SP A has rebooted completely; the amber Fault LED on SP A should not be on or blinking. 14. Click Apply Settings. After about 30 seconds, a confirmation screen opens, similar to the one in Figure 5. The display lists the network configuration information you entered in step 12, and includes a message informing you that SP B is rebooting. 20 EMC CLARiiON CX300, CX500, and CX700 Initialization Guide