EMC CX300 Initialization Guide - Page 13
Initialization Steps, CX500 SP or CX300 SP, as shown - serial connection
View all EMC CX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Initializing the Storage System Initialization Steps Follow the steps below to initialize the storage system from the service laptop. These instructions assume that you are starting with SP A. However you can start the initialization process with either SP. 1. Connect the NULL modem cable between the laptop serial port (COM 1) and the SP A service port (|0|0|on a CX700, or on a CX500 SP or CX300 SP), as shown in Figure 1. For a CX500, you will need the RJ45/DB9 serial adapter that shipped with the storage system. lOlOl Service Laptop RS-232 Cable Figure 1 COM 1 to Service Port Connection (CX700 Shown) SP B SP A EMC2306 2. Turn the service laptop on. Be sure that the system is powered up. The SP's power LED should be a steady green, and no amber LEDs should be blinking. EMC CLARiiON CX300, CX500, and CX700 Initialization Guide 13