EMC CX300 Initialization Guide - Page 33
/setup, Security, Privileged Users, Using the Serial Cable Via the Serial Port Alternate Method - installation guide
View all EMC CX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Installing Optional Navisphere 6.X Software Using the Serial Cable Via the Serial Port (Alternate Method) To set initial security parameters while connected to the SP via serial connection: 1. Open your web browser on the service laptop. 2. In the URL window, enter the following IP address: 192.168.1.1/setup 3. In the Navisphere 6.X Setup Pages that appear, set Security and/or Privileged Users as needed. Security is automatically set for the other SP. EMC CLARiiON CX300, CX500, and CX700 Initialization Guide 33
EMC CLARiiON CX300, CX500, and CX700
Initialization Guide
33
Installing Optional Navisphere 6.X Software
Using the Serial Cable Via the Serial Port (Alternate Method)
To set initial security parameters while connected to the SP via serial
connection:
1.
Open your web browser on the service laptop.
2.
In the URL window, enter the following IP address:
192.168.1.1/setup
3.
In the Navisphere 6.X Setup Pages that appear, set
Security
and/or
Privileged Users
as needed.
Security is automatically set for the other SP.