EMC CX300 Initialization Guide - Page 29

Installing Optional Navisphere 6.X Software Installing Optional Navisphere 6.X Software You may need to add the following software: ◆ Navisphere Manager ◆ Access Logix™, SnapView™, MirrorView™, SAN Copy™, or Analyzer options To add the software, you will need to connect the laptop directly to the SP LAN port. Use the 10BaseT crossover cable that shipped with your system. Connecting the Service Laptop to the SP LAN Port Follow steps 1-4 to create a dedicated LAN connection between the service laptop and the storage system. 1. If necessary, connect an RJ45 adapter to the NIC card on the laptop. 2. Connect the crossover cable from the service laptop to the LAN port on SP A or SP B. Figure 11 shows this connection on a CX700 system. LAN Cable Figure 11 Connecting the Crossover Cable (CX700 Shown) NIC Card EMC229 EMC CLARiiON CX300, CX500, and CX700 Initialization Guide 29