EVGA 132-YW-E178-A1 User Guide - Page 25
Connecting Serial ATA Cables
View all EVGA 132-YW-E178-A1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Connecting Serial ATA Cables The Serial ATA II connector is used to connect the Serial ATA II device to the motherboard. These connectors support the thin Serial ATA II cables for primary storage devices. The current Serial ATA II interface allows up to 300MB/s data transfer rate. There are six serial ATA connectors on the motherboard that support RAID 0, RAID 1, RAID 5, RAID 0+1 and JBOD configurations. SATA 3 SATA 5 SATA 4 SATA 6 SATA 1 (bottom) SATA 2 (top) Connect the locking cable end to the motherboard connector. Connect the end without the lock to the drive. EVGA 15
EVGA
15
Connecting Serial ATA Cables
The Serial ATA II connector is used to connect the Serial ATA II device to the motherboard.
These connectors support the thin Serial ATA II cables for primary storage devices. The
current Serial ATA II interface allows up to 300MB/s data transfer rate.
There are six serial ATA connectors on the motherboard that support RAID 0, RAID 1,
RAID 5, RAID 0+1 and JBOD configurations.
SATA 3
SATA 5
SATA 4
SATA 6
SATA 1 (bottom)
SATA 2 (top)
Connect the locking cable end to the motherboard connector.
Connect the end without the lock to the drive.