EVGA 132-YW-E178-A1 User Guide - Page 40

IDE Channel and SATA Channel Use these functions to detect and configure the individual IDE and SATA channels. Select a channel and press Enter to display the IDE/SATA sub-menu.  IDE Channel 0 Master  IDE Channel 0 Slave  SATA 1 (A0)  SATA 2 (A1)  SATA 3 (B0)  SATA 4 (B1)  SATA 5 (C0)  SATA 6 (C1) [None] [None] [None] [None] [None] [None] [None] [None] Press ENTER to display SATA Channel sub-menu IDE Auto-Detect [Press Enter] Extended IDE Drive Access Mode [None} Auto Capacity 0 MB Cylinder 0 Head 0 Precomp 0 Landing Zone 0 Sector 0 Press ENTER to display IDE Channel sub-menu IDE HDD Auto-Detect IDE Channel 0 Slave Access Mode Capacity Cylinder Head Precomp Landing Zone Sector [Press Enter] [Auto} [Auto] 0 MB 0 0 0 0 0 Press Enter to auto-detect IDE and SATA channels in the system. Once the channel is detected, the values for Capacity, Cylinder, Heads, Precomp, Landing Zone, and Sector are automatically filled in.  None There is no HDD installed or set.  Auto The system can auto-detect the hard disk when booting up.  Manual When you set the channel to [Manual] and change Access Mode to [CHS], you can then enter the number of cylinders, heads, Precomp, landing zone, and sector. You can manually enter the values or you can press Enter to display a window that tells you the min and max values. EVGA 30