Epson 2070 User Manual - Page 31
Connecting the Printer to Your Computer, Plug the cable connector securely into the printer's parallel
UPC - 010343812277
View all Epson 2070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Connecting the Printer to Your Computer Use an interface cable with a 36-pin connector on the printer end, and a connector that will work with your computer on the other end. See your computer's reference guide for the required connector type. Follow these steps to connect the printer to your computer: 1. Make sure both the printer and computer are turned off. 2. Plug the cable connector securely into the printer's parallel interface connector. Squeeze the wire clips together until they lock in place on both sides of the connector. Note: If your cable has a ground wire, connect it to the ground connector beneath the interface connector. 3. Plug the other end of the cable into the computer. (If there is a ground wire at the computer end of the cable, attach it to the ground connector at the back of the computer.) 1-14 Setting Up the Printer