Epson 2070 User Manual - Page 87
Using Quiet Mode, Using Micro Adjust, Condensed, Load/Eject, Pause
UPC - 010343812277
View all Epson 2070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Using Quiet Mode The Quiet mode allows you to print with less noise, however printing speed is reduced. To enter Quiet mode, hold down the Font and Condensed buttons while turning on the printer. You can only set this mode when you mm on the printer. You cannot set this in the Default Setting mode. When you turn off the printer, Quiet mode is canceled. Each time you want to use this mode, you must turn the printer on as described in this section. Using Micro Adjust The Micro Adjust feature allows you to move paper forward or backward in l/360-inch increments. You can use this feature to adjust the loading and tear-off positions. This section explains how to use Micro Adjust. See the next section for information on adjusting the tear-off position. The loading position is the position of the paper after it has been automatically loaded by the printer. If your printing appears too high or low on the page, you can change the loading position with the Micro Adjust feature as follows: 1. Make sure the printer is turned on. If necessary, lift up the printer cover so you can see the paper position. 2. Load either continuous or single-sheet paper. (Load continuous paper by pressing the Load/Eject button.) 3. Hold down the Pause button for three seconds. The Pause light starts flashing. Using the Printer 3-13