Epson 2070 User Manual - Page 84
draft, Software, lnterface, Auto interface wait, length
UPC - 010343812277
View all Epson 2070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Page length for front and rear tractor For paper fed through the front or rear tractor, you can set the page length to one of the following: 3, 3.5, 4, 5.5, 6, 7, 8, 8.5, 11, 70/6, 12, 14, or 17 inches. High speed draft When you select high speed draft, the printer can print up to 300 cps (characters per second) at 10 cpi in draft mode. If you select normal speed draft, it prints up to 275 cps at 10 cpi in draft mode. Print direction You can select auto print direction, unidirectional printing, or bidirectional printing. Printing is normally bidirectional; however, unidirectional printing allows for precise vertical printing alignment. Software When you select ESC/P 2, the printer operates in the EPSON ESC/P 2 mode. When you select IBM, the printer emulates an IBM printer. lnterface mode The printer has two interfaces: parallel and Type-B (optional). You can choose parallel, optional, or automatic for the interface mode. Auto interface wait time The printer determines which interface is receiving data and switches to that interface until the end of the print job (when no data is received from the selected interface for the amount of time specified). You can specify either 10 seconds or 30 seconds. 3-10 Using the Printer