Epson 2070 User Manual - Page 91
Using the Tear Off/Bin button, Adjust feature. See Using Micro Adjust, earlier in
UPC - 010343812277
View all Epson 2070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
3. When you resume printing, the printer automatically feeds the paper back to the loading position and begins printing. If the perforation does not meet the tear-off edge, you can adjust the tear-off position using the Micro Adjust feature as described in the previous section. You can leave auto tear-off mode on even when you are using single sheets because the mode is disabled when you move the paper release lever to the single-sheet position. Note: Set auto tear-off mode to off in the Default Setting mode, or avoid touching the Tear Off/Bin button when using the pull (top) tractor. Using the Tear Off/Bin button Except when using the pull (top) tractor, you can use the Tear Off/Bin button to advance continuous paper to the tear-off position by following the steps below: 1. Make sure printing has finished. Then press the Tear Off/Bin button until the two lights on the control panel start flashing. The printer advances the paper to the tear-off edge. 2. Tear off all printed pages. If the perforation is not aligned with the tear-off edge, adjust the tear-off position using the Micro Adjust feature. See "Using Micro Adjust," earlier in this chapter. 3. When you resume printing, the printer feeds the paper back to the loading position and begins printing. (You can also manually feed the paper back to the loading position by pressing the Tear Off/Bin button.) Using the Printer 3-17