Epson 2070 User Manual - Page 86
carriage, Alternate Graphic, Roll paper
UPC - 010343812277
View all Epson 2070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Auto line feed When auto line feed is on, the printer accompanies each carriage return (CR) code received with a line feed (LF) code. Auto carriage return When the auto carriage return feature is on, each line feed (LF) code or ESC J (n/180-inch line feed) code is accompanied by a carriage return (CR) code and the printer moves the next print position to the left margin. When this feature is off, you must send the CR code after the line feed code to move the print position to the left margin. This feature is available in IBM emulation mode only. Alternate Graphic Mode (AGM) When AGM is on, the printer can use some advanced graphics commands like those available in ESC/P2 mode. When you select IBM 2390/2391 mode, this setting is available. The default setting is off. 0 slash The zero character has a slash (0) when this setting is on; it has no slash (0) when the setting is off. This allows you to easily distinguish between an uppercase "0" character and a zero. Buzzer (Beep) The printer beeps when some errors occur. See "Troubleshooting" in Chapter 6 for more information. If you do not want the printer to beep, turn this setting off. Roll paper When you turn on this mode, roll paper is not recognized as single-sheet paper even if the paper release lever is set to the single-sheet position. This means that the paper is not ejected and advanced forward to the next page with the LF/FF button. 3-12 Using the Printer