Epson 2070 User Manual - Page 95
Using Printer Options, Warining
UPC - 010343812277
View all Epson 2070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
3. If the optional tractor is installed in the pull tractor position, remove it. Make sure the paper tension unit is not installed. Note: Store the paper guide, optional pull tractor, and paper tension unit in a safe place; you will need to reinstall them if you remove the cut-sheet feeder. 4. Gently move the print head to the ribbon installation position. Warining: Never move the printhead while the printer is turned on; this can damage the printer. Also, the print head may become hot during use. Always let it cool before you touch it. 5. Hold the cut-sheet feeder in both hands and on both sides of the feeder. Fit the notches over the mounting posts on the printer. Lower the cut-sheet feeder until it rests on the printer. 6. Insert the cable into the connector as shown above. 7. Replace the printer cover. You are now ready to load paper with your cut-sheet feeder. To remove the cut-sheet feeder, reverse the steps above. Using Printer Options 4-3