Epson 2070 User Manual - Page 72
Multipart Forms, to print, forms that are joined at the side
UPC - 010343812277
View all Epson 2070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Multipart forms Your printer can print on both single-sheet and continuous multipart forms. You can load single-sheet multipart forms in both the front and top paper slots. You can load continuous multipart forms from the front, rear, and bottom. Note: Use only carbonless multi part forms. You can use multipart forms of up to four parts, including the original. Make sure you set the paper thickness -lever to the proper position. You load multipart forms the same way as single sheets or continuous paper. For best results with continuous multipart forms, you should use the tractors in a push/pull combination. The paper may be loaded from the front or rear. When loading multipart forms from the rear, an optional pull tractor is required. When loading multipart forms from the front, two optional tractors are required (the rear push tractor cannot be removed). For details, see "Using Single Sheets" or "Using Continuous Paper," earlier in this chapter. Also be sure to set the loading position as described in "Using Micro Adjust" in Chapter 3. Caution: When printing multipart forms, make sure the printing stays entirely within the printable area of the forms. (For more information on the printable area, see the Appendix.) Use multipart forms only under normal operating conditions. When loading single-sheet multipart forms that are bound at the top by line glueing, use the top or front paper path. (If you plan to print on forms that are joined at the side by line glueing, use the front paper path.) Load multipart forms that are free of wrinkles. 2-34 Paper Handling