Epson BrightLink 695Wi DuoLink Setup Guide - Page 18

Matching Images for Multiple Projectors, Adjusting Color Uniformity

Get Epson BrightLink 695Wi PDF manuals and user guides View all Epson BrightLink 695Wi manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Matching Images for Multiple Projectors You can adjust the projectors' images to minimize any differences in brightness or color. Use these sections to adjust the image settings for each projector. Before adjusting the images, make sure you have used the Geometry Correction settings to align the projected images, and that both projectors are in the same Color Mode. In most cases, use the Presentation color mode for DuoLink installations. To change the Color Mode setting, press the Menu button and select the Extended > Multi-Projection > Color Mode setting. Adjusting Color Uniformity Adjusting the Projector's Brightness Level Matching the Image Colors Adjusting RGBCMY Parent topic: Configuring Projector Settings for Multiple Projectors Adjusting Color Uniformity If the color tone is uneven on each screen, adjust the color tone balance in the Extended menu of each projector. (The color tone may not be uniform even after performing color uniformity.) Note: If you cannot adjust color uniformity, make sure the Color Mode setting is not set to Dynamic. 1. Press the Menu button on the remote or control panel, select the Extended menu, and press Enter. 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
18
Matching Images for Multiple Projectors
You can adjust the projectors' images to minimize any differences in brightness or color. Use these
sections to adjust the image settings for each projector.
Before adjusting the images, make sure you have used the
Geometry Correction
settings to align the
projected images, and that both projectors are in the same
Color Mode
. In most cases, use the
Presentation
color mode for DuoLink installations.
To change the
Color Mode
setting, press the
Menu
button and select the
Extended
>
Multi-Projection
>
Color Mode
setting.
Adjusting Color Uniformity
Adjusting the Projector's Brightness Level
Matching the Image Colors
Adjusting RGBCMY
Parent topic:
Configuring Projector Settings for Multiple Projectors
Adjusting Color Uniformity
If the color tone is uneven on each screen, adjust the color tone balance in the Extended menu of each
projector. (The color tone may not be uniform even after performing color uniformity.)
Note:
If you cannot adjust color uniformity, make sure the
Color Mode
setting is not set to
Dynamic
.
1.
Press the
Menu
button on the remote or control panel, select the
Extended
menu, and press
Enter
.